Choose your ECU

Not sure which ECU is right for you? Check our detailed comparison to find the perfect one for your build!

EMU CLASSIC

Recommended for classic
street cars.

Support for full sequential 6-cylinder no DBW engine.

An affordable and reliable solution for port injection engines. Ideal for older-generation engines with limited modifications, offering dependable performance at a great value.

EMU BLACK

Recommended for street cars and entry-level race cars. 

Support for full sequential 6-cylinder with DBW engine.

One of the most well-rounded ECUs on the market, offering an excellent balance of features and performance. Capable of managing port injection engine, from enthusiast to motorsport projects.

EMU PRO

Recommended for advanced street cars and race cars. 

Support for full sequential 8/12-cylinder (PRO-8/16) engine.

Pro level gear, versatile and limitless. Perfect for the most demanding builds and those with a hunger for competition, delivering unmatched performance and flexibility.

 

EMU CLASSIC EMU BLACK EMU PRO-8 EMU PRO-16
Engine type: Port Injection Port Injection Port Injection
Direct Injection (requires GDI Driver
)
Port Injection
Direct Injection (requires GDI Driver
)
Water and dust resistant: IP60 IP60 IP65 IP65
Connector: 2x FCI automotive (48 pins) 2x FCI automotive (63 pins) 3x AMP Superseal (96 pins) 4x AMP Superseal (120 pins)

 

Outputs:

EMU CLASSIC EMU BLACK EMU PRO-8 EMU PRO-16
Injectors: 6 HiZ (5A) Up to 8x HiZ (5A)* 8x peak and hold (8A) 16x peak and hold (8A)
Direct injection: No No Up to 8x injectors
2 high-pressure fuel pumps
(requires GDI Driver)
Up to 12x injectors
2 high-pressure fuel pumps
(requires GDI Driver)
Ignition outputs: 6x active or passive coils (7A) (software selectable) 6x active or passive coils (7A) (software selectable) 8x active or passive coils (15A) (software selectable) 12x active or 10x passive coils (15A) (software selectable)
Auxiliary outputs: 6x low-side (5A)
1x dedicated WBO heater (5A)
Up to 6x low-side (5A)*
1x dedicated WBO heater (5A)
12x low-side (5A) 16x low-side (5A)
H-bridges: 2x full H-bridge (0.8A) (protected) 2x full H-bridge (7A) (protected) 3x full H-bridge (8A) (protected, diagnostic) 4x full H-bridge (8A) (protected, diagnostic)

* Two auxiliary outputs can be used as injector outputs

Inputs:

EMU CLASSIC EMU BLACK EMU PRO-8 EMU PRO-16
Analog inputs: 7×10 bits
2x EGT dedicated inputs (Type-K)
9x 10 bits, with software selectable pullups/ pulldowns
2x EGT dedicated inputs (Type-K)
16x 12 bits with software selectable pullups/ pulldowns
4×16 bits high precision
20x 12 bits with software selectable pullups/ pulldowns
8×16 bits high precision
Digital inputs: 3x inputs for VR or HALL sensors (software selectable) 3x inputs for VR or HALL sensors (software selectable)
3x switch to ground inputs
8x inputs for VR or HALL sensors (software selectable) 10x inputs for VR or HALL sensors (software selectable)
+5V sources: 1x 500 milliamps 1x 500 milliamps 2x 500 milliamps (two independent) 2x 500 milliamps (two independent)
Knock sensors: 2 inputs 2 inputs 2 inputs 2 inputs

 

Features:

EMU CLASSIC EMU BLACK EMU PRO-8 EMU PRO-16
Lambda controllers: 1x LSU 4.2 1x LSU 4.9 or LSU 4.2 2x LSU 4.9 2x LSU 4.9
DBW controllers: Requires external module 1x 2x 2x
VVT controllers: 2x 2x 4x 4x

 

Communication:

EMU CLASSIC EMU BLACK EMU PRO-8 EMU PRO-16
CAN-bus: Requires external module 1x CAN 2.0 A/B 2x CAN 2.0 A/B 2x CAN 2.0 A/B
LIN-bus: No No 1x 1x
PC connectivity: USB-A USB-C CAN** CAN**

** Requires CAN adapter (ECUMASTER USBtoCAN, Peak CAN or Kvaser)

Logging:

EMU CLASSIC EMU BLACK EMU PRO-8 EMU PRO-16
Realtime PC data-logging: Yes Yes Yes Yes
External data-logging: Requires EDL-1 Requires EDL-1 To USB flash drive To USB flash drive
Data-logging frequency: 20Hz 25Hz Up to 500 Hz Up to 500 Hz

 

Support:

EMU CLASSIC EMU BLACK EMU PRO-8 EMU PRO-16
All features unlocked: Yes Yes Yes Yes
Free software updates: Yes Yes Yes Yes